clear policy hitcounts

Syntax

clear policy hitcounts { all | [] [[interface[in|out|routed-in]] | [vlan[in|out]]] | global }

Description

Clears the policy hit count statistics.

Command context

Operator (>) or Manager (#)

Parameters

all

Selects all policies.

Specifies the policy name.

interface

Specifies the interface name.

vlan

Specifies the VLAN.

in

Specifies the inbound (ingress) traffic direction.

out

Selects the outbound (egress) traffic direction.

routed-in

选择交通方向的路由。不应用cable to a policy applied to a VLAN.

global

Selects the globally applied policy.

Authority

Operators or Administrators or local user group members with execution rights for this command. Operators can execute this command from the operator context (>) only.

Examples

On the 6400 Switch Series, interface identification differs.

Clearing policy hit counts and then showing the policy hit counts (statistics):
switch#clear policy hitcounts my_policy int 1/1/1 inswitch#show policy hitcounts my_policyStatistics for Policy my_policy: Interface 1/1/1* (in): Hit Count Configuration 10 class ipv6 my_class1 action dscp af21 action drop 0 10 match any any any count * policy statistics are shared among each context type (interface, VLAN). For routed ingress, they are only shared within the same VRF. Use 'policy NAME copy' to create a new policy for separate statistics.
Clearing the globally applied policy hit counts and then showing the global policy hit counts (statistics):
switch#clear policy hitcounts globalswitch#show policy hitcounts globalStatistics for Policy my_policy: Global Policy: Hit Count Configuration 10 class ipv6 my_class1 action mirror 0 10 match any any any count * policy statistics are shared among each context type (interface, VLAN). For routed ingress, they are only shared within the same VRF. Use 'policy NAME copy' to create a new policy for separate statistics.
Clearing hit counts for policyMY_IPv6_Policyapplied to VLAN 10 (ingress):
switch#clear policy hitcounts My_IPv6_Policy vlan 10 in
Clearing hit counts for all policies:
switch#clear policy hitcounts all