show copp-policy factory-default

描述

Display the configuration for the factory-default CoPP policy.

Command context

Operator (>) or Manager (#)

Parameters

commands

Displays output as CLI commands.

[vsx-peer]

Shows the output from the VSX peer switch. If the switches do not have the VSX configuration or the ISL is down, the output from the VSX peer switch is not displayed. This parameter is available on switches that support VSX.

Authority

Operators or Administrators or local user group members with execution rights for this command. Operators can execute this command from the operator context (>) only.

Example

Displaying the factory-default policy:

switch#show copp-policy factory-defaultclass drop priority rate kbps burst kB min-max pps --------------------- ---- -------- --------- -------- ----------------- acl-logging 0 468 4 38-906 arp-broadcast 4 1406 4 115-2734 arp-protect 4 2343 4 192-4562 arp-unicast 5 937 4 77-1828 bfd-control 9 937 16 77-1828 <--OUTPUT OMITTED FOR BREVITY--> default 1 17343 16 1427-33859

Displaying the active configuration ofMy_CoppPolicy(My_CoppPolicyis applied):

switch#配置终端switch(config)#apply copp-policy My_CoppPolicyswitch(config)#do show copp-policy My_CoppPolicyclass drop priority rate kbps burst kB min-max pps hardware rate kbps --------------------- ---- -------- --------- -------- ----------------- ------------------ igmp 6 5000 60 411-9765 5156 lacp 2 2000 64 164-3906 2343 default 1 6000 70 494-11718 6093

Displaying the active configuration ofMy_CoppPolicyCLI commands:

switch#show copp-policy My_CoppPolicy commandscopp-policy My_CoppPolicy class igmp priority 6 rate 5000 burst 60 class lacp priority 2 rate 2000 burst 64 default-class priority 1 rate 6000 burst 70 apply copp-policy My_CoppPolicy

Displaying the user-specified configuration ofMy_CoppPolicy:

switch#show copp-policy My_CoppPolicy configurationclass drop priority rate kbps burst kB min-max pps applied --------------------- ---- -------- --------- -------- ----------------- ------- igmp 6 5000 60 411-9765 yes lacp 2 2000 64 164-3906 yes default 1 6000 70 494-11718 yes

Displaying the user-specified configuration ofMy_CoppPolicyCLI commands:

switch#show copp-policy My_CoppPolicy commands configurationcopp-policy My_CoppPolicy class igmp priority 6 rate 5000 burst 60 class lacp priority 2 rate 2000 burst 64 default-class priority 1 rate 6000 burst 70 apply copp-policy My_CoppPolicy