show system

描述

Shows general status information about the system.

Command context

Operator (>)或经理(#)

[vsx-peer]

Shows the output from the VSX peer switch. If the switches do not have the VSX configuration or the ISL is down, the output from the VSX peer switch is not displayed. This parameter is available on switches that support VSX.

权威

运营商或Administrators or local user group members with execution rights for this command. Operators can execute this command from the operator context (>) only.

Usage

CPU utilization represents the average utilization across all the CPU cores.

System Contact, System Location, and System Description can be set with thesnmp-servercommand.

Examples

Showing system information on a 6300 switch:

switch(config)#show systemHostname : switch System Description : FL.10.xx.xxxxx System Contact : System Location : Vendor : Aruba Product Name : JL659A 6300M 48SR5 CL6 PoE 4SFP56 Swch Chassis Serial Nbr : ID9ZKHN090 Base MAC Address : 9020c2-245080 ArubaOS-CX Version : FL.10.xx.xxxx Time Zone : UTC Up Time : 5 days, 15 hours, 33 minutes CPU Util (%) : 21 Memory Usage (%) : 19

Showing system information om a 6400 switch:

switch(config)#show systemHostname : switch System Description : FL.10.xx.xxxxx System Contact : System Location : Vendor : Aruba Product Name : R0X24A 6405 Chassis Chassis Serial Nbr : SG9ZKM7206 Base MAC Address : 9020c2-dc4700 ArubaOS-CX Version : FL.10.xx.xxxxx Time Zone : UTC Up Time : 32 minutes CPU Util (%) : 3 Memory Usage (%) : 10 BLDG02-F3(config)#