show diagnostic

Description

显示所有模块或指定模块的诊断测试结果。

命令上下文

经理 （#)

Parameters

[fan-tray | line-module | management-module]

Selects the options for enabling or disabling runtime diagnostics for a specific module.

粉丝托盘

Specifies the enabling of diagnostic monitoring specific to a fan tray.

line-module

指定特定于线模块的诊断监视的启用。

management-module

Specifies the enabling of diagnostic monitoring specific to a management module.

Specifies the member/slot for management modules (1/1), line modules (1/1), and fan trays (1/1-1/2) on a 6300 switch.

[vsx-peer]

显示来自VSX对等开关的输出。如果开关没有VSX配置或ISL降低，则不会显示VSX对等开关的输出。该参数可在支持VSX的开关上可用。

Authority

Administrators or local user group members with execution rights for this command.

用法

When no parameters are used in the command (show diagnostic), the command applies to all modules.

Example

诊断测试结果显示fo简单格式r all modules on a 6300 switch:

switch# show diagnostic brief Module ID Diagnostics Success Performed -------------------- ----- ----------- ------- ManagementModule 1/1 13 100% LineModule 1/1 13 100% FanTray 1/1 1 100% FanTray 1/2 1 100%

在6300开关上的指定模块以简短格式显示诊断测试结果：

switch#show diagnostic line-module briefModule ID Diagnostics Success Performed -------------------- ----- ----------- ------- LineModule 1/1 13 100%

Showing diagnostic test results in detail format for all modules on a 6300 switch:

switch#show diagnostic detail模块：ManagementModule 1/1诊断状态错误代码历史记录代码连续失败总计最后运行时间戳第一运行时间戳故障计数计数次数迭代-------------------------------------------------------------------------------- --------------------------------------------------------------------------------- -------------------- ------------------- ddr_cecount Pass 0x0 0x0 0 0 109 2019-07-31 16:43:38 2019-07-31 07:44:55 EMMC PASS 0x0 0x0 0x0 0 0 4 2019-07-07-31 16:08:04 2019-07-07-31 07:44:55 FAN_CTRLR PALS 0x0 0x0 0x0 0x0 0x0 0x0 0x0 0x0 0x0 0x0 0x0 0x0 0x0 0x00 0 4 2019-07-31 16:08:04 2019-07-31 07:44:55 fepld Pass 0x0 0x0 0x0 0x 0 0 0 109 2019-07-07-31 16:43:38 2019-07-07-31 07:44:54:54:54:54:54fru_eeprom Pass 0x0 0x0 0 0 4 2019-07-31 16:08:04 2019-07-31 07:44:54 fru_eeprom_ul Pass 0x0 0x0 0 0 4 2019-07-31 16:08:04 2019-07-31 07：44：54 mm_lcb Pass 0x0 0x0 0 x 0 0 109 2019-07-31 16:43:37 2019-07-07-31 07:44:44:54 PMC Pass 0x0 0x0 0x0 0x0 0 x 009 2019-07-07-07-07-31 16:43:37 2019 2019 2019 2019 2019 2019 2019 2019 2019 2019 2019 2019 201907-31 07:44:54 rdimm_spd Pass 0x0 0x0 0x0 0 0 0 4 2019-07-31 16:08:04 2019-07-07-31 07:44:55 rdimm_tmp pass 0x0 0x0 0x0 0x0 0x0 0x：04 2019-07-31 07:44:55 RTC Pass 0x0 0x00 0 4 2019-07-31 16:08:04 2019-07-31 07:44:55 TMP1 TMP1 Pass 0x0 0x0 0x0 0 x 0 4 2019-07-07-31 16:08:04 2019-07-07-31 07:44:555555555555555555555555555.31 07:44:5555TMP2通行0x0 0x0 0 x 0 0 4 2019-07-31 16:08:04 2019-07-31 07:44:55模块：linemodule 1/1诊断状态状态错误代码记录记录历史记录连续失败总数总计上最后一个运行时间戳第一运行时间戳失败计数迭代----------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------- lc_asic Pass 0x0 0x0 0 0 108 2019-07-31 16:43:37 2019-07-31 07:46:03 poe_ctrlr_1_q1 Pass 0x0 0x0 0 0 4 2019-07-31 16:08:16 2019-07-31 07:46:03 poe_ctrlr_1_q2 Pass 0x0 0x0 0 0 4 2019-07-31 16:08:16 2019-07-31 07:46:04 poe_ctrlr_1_q3 Pass 0x0 0x0 0 0 4 2019-07-31 16:08:16 2019-07-31 07:46:04 poe_ctrlr_2_q1 Pass 0x0 0x0 0 0 4 2019-07-31 16:08:16 2019-07-31 07:46:05 poe_ctrlr_2_q2 Pass 0x0 0x0 0 0 4 2019-07-31 16:08:16 2019-07-31 07:46:05 poe_ctrlr_2_q3 Pass 0x0 0x0 0 0 4 2019-07-31 16:08:16 2019-07-31 07:46:05 poe_ctrlr_3_q1 Pass 0x0 0x0 0 0 4 2019-07-31 16:08:16 2019-07-31 07:46:06 poe_ctrlr_3_q2 Pass 0x0 0x0 0 0 4 2019-07-31 16:08:16 2019-07-31 07:46:06 poe_ctrlr_3_q3 Pass 0x0 0x0 0 0 4 2019-07-31 16:08:17 2019-07-31 07:46:06 poe_ctrlr_4_q1 Pass 0x0 0x0 0 0 4 2019-07-31 16:08:17 2019-07-31 07:46:07 poe_ctrlr_4_q2 Pass 0x0 0x0 0 0 4 2019-07-31 16:08:17 2019-07-31 07:46:07 poe_ctrlr_4_q3 Pass 0x0 0x0 0 0 4 2019-07-31 16:08:17 2019-07-31 07:46:08 Module : FanTray 1/1 Diagnostic Status Error Code History Code Successive Total Failure Total Last Run Timestamp First Run Timestamp Failure Count Count Iteration -------------- ------ ---------- ------------ ------------- ------------- --------- -------------------- ------------------- ft1_eeprom Pass 0x0 0x0 0 0 4 2019-07-31 16:08:33 2019-07-31 07:44:54 Module : FanTray 1/2 Diagnostic Status Error Code History Code Successive Total Failure Total Last Run Timestamp First Run Timestamp Failure Count Count Iteration -------------- ------ ---------- ------------ ------------- ------------- --------- -------------------- ------------------- ft2_eeprom Pass 0x0 0x0 0 0 3 2019-07-31 16:07:50 2019-07-31 07:44:54

在6300开关上的指定模块以详细格式显示诊断测试结果：

switch#show diagnostic management-module detail模块：ManagementModule 1/1诊断状态错误代码历史记录代码连续失败总计最后运行时间戳第一运行时间戳故障计数计数次数迭代-------------------------------------------------------------------------------- --------------------------------------------------------------------------------- -------------------- ------------------- ddr_cecount Pass 0x0 0x0 0 0 109 2019-07-31 16:43:38 2019-07-31 07:44:55 EMMC PASS 0x0 0x0 0x0 0 0 4 2019-07-07-31 16:08:04 2019-07-07-31 07:44:55 FAN_CTRLR PALS 0x0 0x0 0x0 0x0 0x0 0x0 0x0 0x0 0x0 0x0 0x0 0x0 0x0 0x00 0 4 2019-07-31 16:08:04 2019-07-31 07:44:55 fepld Pass 0x0 0x0 0x0 0x 0 0 0 109 2019-07-07-31 16:43:38 2019-07-07-31 07:44:54:54:54:54:54fru_eeprom Pass 0x0 0x0 0 0 4 2019-07-31 16:08:04 2019-07-31 07:44:54 fru_eeprom_ul Pass 0x0 0x0 0 0 4 2019-07-31 16:08:04 2019-07-31 07：44：54 mm_lcb Pass 0x0 0x0 0 x 0 0 109 2019-07-31 16:43:37 2019-07-07-31 07:44:44:54 PMC Pass 0x0 0x0 0x0 0x0 0 x 009 2019-07-07-07-07-31 16:43:37 2019 2019 2019 2019 2019 2019 2019 2019 2019 2019 2019 2019 201907-31 07:44:54 rdimm_spd Pass 0x0 0x0 0x0 0 0 0 4 2019-07-31 16:08:04 2019-07-07-31 07:44:55 rdimm_tmp pass 0x0 0x0 0x0 0x0 0x0 0x：04 2019-07-31 07:44:55 RTC Pass 0x0 0x00 0 4 2019-07-31 16:08:04 2019-07-31 07:44:55 TMP1 TMP1 Pass 0x0 0x0 0x0 0 x 0 4 2019-07-07-31 16:08:04 2019-07-07-31 07:44:555555555555555555555555555.31 07:44:5555tmp2 Pass 0x0 0x0 0 0 4 2019-07-31 16:08:04 2019-07-31 07:44:55

诊断测试结果显示fo简单格式r all modules on a 6400 switch:

switch#show diagnostic briefModule ID Diagnostics Success Performed -------------------- ----- ----------- ------- ManagementModule 1/1 19 100% LineModule 1/3 24 100% LineModule 1/7 12 100% LineModule 1/5 24 100% LineModule 1/4 24 100% LineModule 1/6 24 100% Fabric 1/1 6 100% FanTray 1/2 2 100% FanTray 1/1 2 100%

诊断测试结果显示fo简单格式r a specified module on a 6400 switch:

switch#显示诊断管理模块简介Module ID Diagnostics Success Performed -------------------- ----- ----------- ------- ManagementModule 1/1 19 100%

Showing diagnostic test results in detail format for a specified module on a 6400 switch:

switch#show diagnostic management-module detail模块:ManagementModule 1/1诊断状态ror Code History Code Successive Total Failure Total Last Run Timestp Failure Count Count Iteration -------------- ------ ---------- ------------ ------------- ------------- --------- ---------------- curr_sensor Pass 0x0 0x0 0 0 2 2019-10-14 00:25 ddr_cecount Pass 0x0 0x0 0 0 34 2019-10-14 01:26 eeprom Pass 0x0 0x0 0 0 2 2019-10-14 00:25 eeprom_ul Pass 0x0 0x0 0 0 2 2019-10-14 00:25 emmc Pass 0x0 0x0 0 0 2 2019-10-14 00:26 icbbp Pass 0x0 0x0 0 0 34 2019-10-14 01:24 icbx Pass 0x0 0x0 0 0 34 2019-10-14 01:25 ledpld Pass 0x0 0x0 0 0 34 2019-10-14 01:24 mm_mcb Pass 0x0 0x0 0 0 34 2019-10-14 01:24 psu1 Pass 0x0 0x0 0 0 2 2019-10-14 00:27 psu1_eeprom Pass 0x0 0x0 0 0 2 2019-10-14 00:26 psu2 Pass 0x0 0x0 0 0 2 2019-10-14 00:27 psu2_eeprom Pass 0x0 0x0 0 0 2 2019-10-14 00:27 rdimm_spd Pass 0x0 0x0 0 0 2 2019-10-14 00:26 rdimm_tmp Pass 0x0 0x0 0 0 2 2019-10-14 00:26 rtc Pass 0x0 0x0 0 0 2 2019-10-14 00:26 tmp1 Pass 0x0 0x0 0 0 2 2019-10-14 00:25 tmp2 Pass 0x0 0x0 0 0 2 2019-10-14 00:25 tmp3 Pass 0x0 0x0 0 0 2 2019-10-14 00:25