show environment power-consumption - 188金宝搏的网址

Syntax

show environment power-consumption [vsx-peer]

Not supported on the 6300 Switch Series.

描述

Shows the power being consumed by each management module, line card, and fabric card subsystem, and shows power consumption for the entire chassis.

Command context

Operator (>)或经理(#)

Parameters

[vsx-peer]: Shows the output from the VSX peer switch. If the switches do not have the VSX configuration or the ISL is down, the output from the VSX peer switch is not displayed. This parameter is available on switches that support VSX.

权威

运营商或Administrators or local user group members with execution rights for this command. Operators can execute this command from the operator context (>) only.

Usage

This command is only applicable to systems that support power consumption readings.

The power consumption values are updated once every minute.

The output of this command includes the following information:

Name: Shows the member number and slot number of the management module, line module, or fabric card module.
Type: Shows the type of module installed at the location specified byName.
描述: Shows the product name and brief description of the module.
Usage: Shows the instantaneous power consumption of the module. Power consumption is shown in Watts.
Module Total Power Usage: Shows the total power consumption of all the modules listed. Power consumption is shown in Watts.
Chassis Total Power Usage: Shows the total instantaneous power consumed by the entire chassis, including modules and components that do not support individual power reporting. Power consumption is shown in Watts.
Chassis Total Power Available: Shows the total amount of power, in Watts, that can be supplied to the chassis.
Chassis Total Power Allocated: Shows total power, in Watts, that is allocated to powering the chassis and its installed modules.
Chassis Total Power Unallocated: Shows the total amount of power, in Watts, that has not been allocated to powering the chassis or its installed modules. This power can be used for additional hardware you install in the chassis.

Example

Showing the power consumption for an Aruba 6400 switch:

switch>show environment power-consumptionPower Name Type Description Usage ------------------------------------------------------------------------------ 1/1 management-module R0X31A 6400 Management Module 18 W 1/2 management-module 0 W 1/3 line-card-module 0 W 1/4 line-card-module R0X39A 6400 48p 1GbE CL4 PoE 4SFP56 Mod 54 W 1/5 line-card-module 0 W 1/6 line-card-module R0X39A 6400 48p 1GbE CL4 PoE 4SFP56 Mod 56 W 1/7 line-card-module R0X39A 6400 48p 1GbE CL4 PoE 4SFP56 Mod 51 W 1/1 fabric-card-module R0X24A 6405 Chassis 71 W Module Total Power Usage 250 W Chassis Total Power Usage 294 W Chassis Total Power Available 1800 W