boot fabric-module

描述

Reboots the specified fabric module.

Command context

Manager (#)

Parameters

Specifies the member and slot of the module in the formatmember/slot. For example, to specify the module in member 1 slot 3, enter1/3.

非盟thority

Administrators or local user group members with execution rights for this command.

Usage

Theboot fabric-modulecommand reboots the specified fabric module. Traffic performance is affected while the module is down.

If the specified module is the only fabric module in an up state, rebooting that module stops traffic switching between line modules and the line modules power down. The line modules power up when one fabric module returns to an up state.

This command is valid for fabric modules only.

Examples

重启模块插槽1/3when auto-confirm is not enabled:

switch#boot fabric-module 1/3This command will reboot the specified fabric module. Traffic performance may be affected while the module is down. Rebooting the last fabric module will stop traffic switching between line modules. Do you want to continue (y/n)?yswitch#

重启模块插槽1/1when auto-confirm is enabled:

switch#boot fabric-module 1/3This command will reboot the specified fabric module. Traffic performance may be affected while the module is down. Rebooting the last fabric module will stop traffic switching between line modules. Do you want to continue (y/n) y (auto-confirm) switch#