show module

Description

Shows information about installed line modules and management modules.

Command context

Operator (>) or Manager (#)

Parameters

Specifies the member and slot numbers in formatmember/slot. For example, to show the module in member 1, slot 3, enter1/3.

[vsx-peer]

Shows the output from the VSX peer switch. If the switches do not have the VSX configuration or the ISL is down, the output from the VSX peer switch is not displayed. This parameter is available on switches that support VSX.

Authority

Operators or Administrators or local user group members with execution rights for this command. Operators can execute this command from the operator context (>) only.

Usage

Identifies and shows status information about the line modules and management modules that are installed in the switch.

If you use theparameter to specify a slot that does not have a line module installed, a message similar to the following example is displayed:

Module 1/4 is not physically present.

To show the configuration information—if any—associated with that line module slot, use theshow running-configurationcommand.

Status is one of the following values:

Active

This module is the active management module.

Standby

这个模块是备用管理模块。

Deinitializing

的module is being deinitialized.

Diagnostic

的module is in a state used for troubleshooting.

Down

的module is physically present but is powered down.

Empty

的module hardware is not installed in the chassis.

Failed

的module has experienced an error and failed.

Failover

This module is a fabric module or a line module, and it is in the process of connecting to the new active management module during a management module failover event.

Initializing

的module is being initialized.

Present

的module hardware is installed in the chassis.

Ready

的module is available for use.

Updating

A firmware update is being applied to the module.

Examples

Showing all installed modules (Aruba 6300 switch):

switch(config)#show moduleManagement Modules ================== Product Serial Name Number Description Number Status ---- ------- -------------------------------------- ---------- ---------------- 1/1 JL659A 6300M 48SR5 CL6 PoE 4SFP56 Swch ID9ZKHN090 Active (local) Line Modules ============ Product Serial Name Number Description Number Status ---- ------- -------------------------------------- ---------- ---------------- 1/1 JL659A 6300M 48SR5 CL6 PoE 4SFP56 Swch ID9ZKHN090 Ready

Showing a line module (Aruba 6400 switch):

switch#show module 1/3Line module 1/3 is ready Admin state: Up Description: 6400 24p 10GT 4SFP56 Mod Full Description: 6400 24-port 10GBASE-T and 4-port SFP56 Module Serial number: SG9ZKMS045 Product number: R0X42A Power priority: 128

Showing a slot that does not contain a line module:

switch(config)#show module 1/3Module 1/3 is not physically present