show lldp configuration

描述

Shows LLDP configuration settings for all interfaces or a specific interface.

Command context

Manager (#)

Parameters

Specifies an interface. Format:member/slot/port.

[vsx-peer]

Shows the output from the VSX peer switch. If the switches do not have the VSX configuration or the ISL is down, the output from the VSX peer switch is not displayed. This parameter is available on switches that support VSX.

权威

Operators or Administrators or local user group members with execution rights for this command. Operators can execute this command from the operator context (>) only.

Example

On the 6400 Switch Series, interface identification differs.

Showing configuration settings for all interfaces:

switch#show lldp configurationLLDP全球配置= ======================== LLDP Enabled : Yes LLDP Transmit Interval : 8 LLDP Hold Time Multiplier : 4 LLDP Transmit Delay Interval : 2 LLDP Reinit Time Interval : 2 TLVs Advertised =============== Management Address Port Description Port VLAN-ID System Capabilities System Description System Name LLDP Port Configuration ======================= PORT TX-ENABLED RX-ENABLED ----------------------------------------------- 1/1/1 Yes Yes 1/1/2 Yes Yes 1/1/3 Yes Yes 1/1/4 Yes Yes 1/1/5 Yes Yes ... mgmt Yes Yes

This example shows configuration settings for interface1/1/1.

switch#show lldp configuration 1/1/1LLDP全球配置= ======================== LLDP Enabled : Yes LLDP Transmit Interval : 8 LLDP Hold Time Multiplier : 4 LLDP Transmit Delay Interval : 2 LLDP Reinit Time Interval : 2 LLDP Port Configuration ======================= PORT TX-ENABLED RX-ENABLED ---------------------------------------------- 1/1/1 Yes Yes