配置带内管理啊n a data port

Prerequisites
  • A connection to the CLI via either the console port or the management port
  • Ethernet cable
Procedure
  1. Use an Ethernet cable to connect a data port to your network.
  2. Configure a layer 3 interface数据端口。
  3. Enable SSH support on the interface (on the default VRF) with the commandssh server vrf default.
    For example:
    switch#configswitch(config)#ssh server vrf default
  4. Enable the Web UI on the interface (on the default VRF) with the commandhttps-server vrf default.
    For example:
    switch(config)#https-server vrf default