erps ring guard-interval

Description

Guard timer is used in nodes recovering from a local failure to avoid loops due to earlier Signal Fail (SF) messages that may be in the ring.

The configuration specifies the guard timer duration in units of 10 ms. The timer period must be greater than the maximum expected forwarding delay in which an R-APS message traverses the entire ring. The default value is 50.

Theno形式的这个命令删除配置的值of the guard interval and sets it to the default value of 50.

Command context

config-erps-ring-

Parameters

Required, specifies the ID of the ring. Range: 1-239

<10 milliseconds>

Required, specifies the guard timer duration in units of 10 ms. Default: 50.

Authority

Administrators or local user group members with execution rights for this command.

Examples

switch(config)# erps ring 3 switch(config-erps-ring-3)# guard-interval 100

switch(config)# erps ring 3 switch(config-erps-ring-3)# no guard-interval