Editing connected devices at the switch level

Use this procedure to view and edit the connection statuses of devices connected to the different interfaces. Enabling or disabling settings at the switch level does not change the configuration on the interface.

Procedure
  1. In the navigation pane, expandConnected Devices, and selectConfiguration.

    The Configuration page is displayed.

  2. In theStatuspanel, click.

    配置对话框显示。

  3. You can configure the following parameters:

    • CDP: Enables or disables CDP support globally on all active interfaces. By default, CDP is enabled.

    • LLDP: Enables or disables LLDP support globally on all active interfaces. By default, LLDP is enabled.

    • Client Tracking: Enables or disables client tracking on all active interfaces.

    • Client Tracking Probe: Enables or disables client tracking probe on all active interfaces.

  4. ClickOK.