show ipv6 ospfv3

描述

显示OSPFv3information including area, state, and configuration information.

Command context

Operator (>)或经理(#)

Parameters

Specifies an OSPFv3 process ID optionally to show OSPFv3 information for a particular OSPFv3 process. Range: 1 to 63.

all-vrfs

Select to show OSPFv3 information for all VRFs.

vrf

Specifies the name of a VRF. Default: default.

[vsx-peer]

Shows the output from the VSX peer switch. If the switches do not have the VSX configuration or the ISL is down, the output from the VSX peer switch is not displayed. This parameter is available on switches that support VSX.

权威

Operators or Administrators or local user group members with execution rights for this command. Operators can execute this command from the operator context (>) only.

Example

Showing general OSPFv3 configurations:

switch#show ipv6 ospfv3 1Routing Process 1 with ID: 1.1.1.1 VRF default ----------------------------------------------- OSPFv3 Protocol is enabled Graceful-restart is configured Restart Interval: 120, State: inactive Last Graceful Restart Exit Status: none Area Border: false AS Border: false SPF: Start Time: 200ms, Hold Time: 1000ms, Max Wait Time: 5000ms LSA: Start Time: 5000ms, Hold Time: 0ms, Max Wait Time: 0ms LSA Arrival: 1000ms Maximum Paths to Destination: 4 Number of External LSAs 0, checksum sum 0 Summary address: prefix fd00::0/64 advertise tag 10 Number of areas is: 2, 2 normal, 0 stub, 0 NSSA Number of active areas is: 1, 1 normal, 0 stub, 0 NSSA Reference Bandwidth: 100000 Mbps Area (0.0.0.0) (Active) Interfaces in this Area: 1 Active Interfaces: 1 Passive Interfaces: 0 Loopback Interfaces: 0 SPF calculation has run 9 times Number of LSAs: 4, checksum sum 195745 Area (0.0.0.1) (Inactive) Interfaces in this Area: 0 Active Interfaces: 0 Passive Interfaces: 0 Loopback Interfaces: 0 SPF calculation has run 8 times Area ranges: fd00::1/64, inter-area, advertise Number of LSAs: 0, checksum sum 0