neighbor orf prefix-list in

Syntax

neighbororf-prefix-listin no neighbororf-prefix-listin

Description

Applies an inbound prefix list filter to filter the distribution of BGP neighbor information.

The没有form of this command restores the default behavior of not applying the prefix list filter.

NOTE:

This command must be used only along with the ORF capability to take effect.

Command context

config-bgp-ipv4-uc

or

config-bgp-ipv6-uc

Parameters

Specifies an IP address.

orf-prefix-list

Sends the prefix list name to be filtered.

Usage

To use this command, the following conditions must be met:

  • 如果溃败e-map inbound is also applied on multiple neighbors along with ORF, then the route-map name must be common on all the neighbors.

  • 如果溃败e-map inbound is also applied on an IPv6 AF BGP neighbor, then the route-map sequence number with value 1 cannot be used.

Authority

Administrators or local user group members with execution rights for this command.

Examples

Applying the inbound prefix list filter:
switch(config-bgp-ipv4-uc)#邻居1.1.1.1 orf-prefix-list ABC
Removing the inbound prefix list filter:
switch(config-bgp-ipv4-uc)#没有邻居1.1.1.1 orf-prefix-list ABC