show ipv6 route
Syntax
show ipv6 route [<X.X.X.X> | <X.X.X.X/M> | all-vrfs | bgp | connected | local | ospf | static | summary | vrfDescription
Displays IPv6 route tables.
Command context
Operator (>) or Manager (#)
Parameters
-
-
Display exact route match.
-
-
Display exact route match.
-
all-vrfs -
Display information for all VRFs.
-
bgp -
Display bgp routes only.
-
connected -
显示connected routes only.
-
local -
Display local routes only.
-
ospf -
Display ospf routes only.
-
static -
Display static routes only.
-
summary -
Display the aggregate count of routes per routing protocol.
-
vrf -
多联机的名字(如果没有指定一个多联机
-
[vsx-peer] -
Shows the output from the VSX peer switch. If the switches do not have the VSX configuration or the ISL is down, the output from the VSX peer switch is not displayed. This parameter is available on switches that support VSX.
Authority
Operators or Administrators or local user group members with execution rights for this command. Operators can execute this command from the operator context (>) only.
Example
switch#show ipv6 routeDisplaying ipv6 routes selected for forwarding '[x/y]' denotes [distance/metric] 110::/124, 1 unicast next-hops via 120::1, [1/0], static 111::/124, 1 unicast next-hops via 1/1/1, [1/0], static 112::/124, 1 unicast next-hops via 1/1/1, [3/0], static 113::/124, 1 unicast next-hops via 120::1, [5/0], static 114::/124, blackhole, 1, [1/0], static 115::/124, reject, 1, [1/0], static 120::/124, 1 (null) next-hops via 120::2, [0/0], connected