show bgp neighbors

描述

This command shows information about BGP and TCP connections to neighbors. If neighbors are member of a peer-group, the command shows the configured values inherited from the peer-group. The configured values are postfixed with a caret (^) for inherited values.

Command context

Operator (>)或经理(#)

Parameters

vrf

Shows the information for a specified VRF.

ipv4单播

Shows the information for an IPv4 unicast address family.

ipv6 unicast

Shows the information for an IPv6 unicast address family.

all

Shows the information for all address families and subaddress families.

[vsx-peer]

Shows the output from the VSX peer switch. If the switches do not have the VSX configuration or the ISL is down, the output from the VSX peer switch is not displayed. This parameter is available on switches that support VSX.

权威

Operators or Administrators or local user group members with execution rights for this command. Operators can execute this command from the operator context (>) only.

Examples

Showing all information about BGP and TCP connections to neighbors:

switch#show bgp all neighborsCodes: ^ Inherited from peer-group VRF : default BGP Neighbor 10.1.1.2 (Internal) Description : Peer-group : Remote Router Id : 10.1.1.2 Local Router Id : 1.0.0.1 Remote AS : 1 Local AS : 1 Remote Port : 0 Local Port : 0 State : Idle Admin Status : Up Conn. Established : 0 Conn. Dropped : 0 Passive : No Update-Source : Cfg. Hold Time : 180 Cfg. Keep Alive : 60 Neg. Hold Time : 0 Neg. Keep Alive : 0 Up/Down Time : 00h:00m:00s Alt. Local-AS : 0 Local-AS Prepend : No BFD : Disabled Password : Last Err Sent : No Error Last SubErr Sent : No Error Last Err Rcvd : No Error Last SubErr Rcvd : No Error Graceful-Restart : Enabled Gr. Restart Time : 120 Gr. Stalepath Time : 150 Remove Private-AS : No TTL : 255 Local Cluster-ID : Weight : 0 Fall-over : No Confederation-Peers : No Message statistics Sent Rcvd ------------------- ----- ----- Open 0 0 Notification 0 0 Updates 0 0 Keepalives 0 0 Route Refresh 0 0 Total 0 0 Capability Advertised Received ----------- ----------- ---------- Route Refresh Yes No Graceful Restart Yes No Add-Path No No Four Octet ASN Yes No Address family IPv4 Unicast Yes No Address family IPv6 Unicast No No Address Family : IPv4 Unicast ----------------------------- Rt. Reflect. Client : No Send Community : Allow-AS in : 0 Advt. Interval : 30 Max. Prefix : 64000 Soft Reconfig In : Nexthop-Self : Default-Originate : Cfg. Add-Path : Send Neg. Add-Path : Send Routemap In : Routemap Out : ORF Type : Prefix-list ORF Capability : Receive Address Family : IPv6 Unicast ----------------------------- ORF Type : Prefix-list ORF Capability : Receive Cfg. Add-Path : Send Neg. Add-Path : Send