show ip helper-address
Syntax
show ip helper-address [interface描述
显示了定义的helper IP地址for all interfaces or a specific interface.
Command context
Manager (#)
Parameters
-
interface -
Specifies an interface. Format:
member/slot/port. -
[vsx-peer] -
Shows the output from the VSX peer switch. If the switches do not have the VSX configuration or the ISL is down, the output from the VSX peer switch is not displayed. This parameter is available on switches that support VSX.
Authority
Operators or Administrators or local user group members with execution rights for this command. Operators can execute this command from the operator context (>) only.
Example
On the 6400 Switch Series, interface identification differs.
switch#show ip helper-addressIP Helper Addresses Interface: 1/1/1 IP Helper Address VRF ----------------- ----------------- 192.168.20.1 default 192.168.10.1 default Interface: 1/1/2 IP Helper Address VRF ----------------- ----------------- 192.168.30.1 RED
switch#show ip helper-address interface 1/1/1IP Helper Addresses Interface: 1/1/1 IP Helper Address VRF ----------------- ----------------- 192.168.20.1 default 192.168.10.1 default