show dhcpv4-snooping binding

描述

Shows the DHCPv4 snooping binding configuration.

Command context

Operator (>)或经理(#)

Parameters

[vsx-peer]

Shows the output from the VSX peer switch. If the switches do not have the VSX configuration or the ISL is down, the output from the VSX peer switch is not displayed. This parameter is available on switches that support VSX.

权威

运营商或Administrators or local user group members with execution rights for this command. Operators can execute this command from the operator context (>) only.

Examples

On the 6400 Switch Series, interface identification differs.

Showing the DHCPv4 snooping binding configuration:

switch(config)#show dhcpv4-snooping bindingMacAddress IP VLAN Interface Time-Left ----------------- --------------- ---- --------- --------- aa:b1:c1:dd:ee:ff 10.2.3.4 1 1/1/2 582 aa:b2:c2:dd:ee:ff 10.2.3.5 1 1/1/2 584