show ipv6 neighbors

描述

Shows entries in the ARP table for all IPv6 neighbors for all VRFs or for a specific VRF.

When no parameters are specified, this command shows all ARP entries for the default VRF, and state information forreachableandstaleentries only.

Command context

Operator (>)或人ager (#)

权威

Administrators or local user group members with execution rights for this command.

Parameters

all-vrfs

指定所有多联机。

vrf

Specifies a VRF name. Length: 1 to 32 alphanumeric characters.

[vsx-peer]

Shows the output from the VSX peer switch. If the switches do not have the VSX configuration or the ISL is down, the output from the VSX peer switch is not displayed. This parameter is available on switches that support VSX.

Examples

switch#show ipv6 neighborsIPv6 Entries: ------------------------------------------------------- IPv6 Address MAC Port Physical Port State fe80::a21d:48ff:fe8f:2700 a0:1d:48:8f:27:00 vlan2300 1/1/31 reachable fe80::f603:43ff:fe80:a600 f4:03:43:80:a6:00 vlan2300 1/1/30 reachable ------------------------------------------------------- Total Number Of IPv6 Neighbors Entries Listed: 2. -------------------------------------------------------