loop-protect transmit-interval
Syntax
loop-protect transmit-interval <TIME> no loop-protect transmit-interval [<TIME>]描述
Configures the time interval between successive loop protect packets sent on an interface.
The没有form of this command sets the time interval to the default value of 5 seconds.Command context
config
Parameters
-
<TIME> -
Configures the transmit interval in seconds. Range: 5 to 10. Default: 5.
一个uthority
一个dministrators or local user group members with execution rights for this command.
Examples
switch(config)#loop-protect transmit-interval 10switch(config)#没有loop-protect transmit-interval