show mvrp config

Description

Displays the MVRP configuration for all L2 ports or optionally for the ports specified.

Command context

Operator (>) or Manager (#)

Parameters

Specifies displaying information for a particular port number.

指定列表的显示信息的几率ts.

LAG

Specifies displaying information by LAG. Range: 1 to 128.

[vsx-peer]

Shows the output from the VSX peer switch. If the switches do not have the VSX configuration or the ISL is down, the output from the VSX peer switch is not displayed. This parameter is available on switches that support VSX.

Authority

Operators or Administrators or local user group members with execution rights for this command. Operators can execute this command from the operator context (>) only.

Examples

On the 6400 Switch Series, interface identification differs.

switch#show mvrp configConfiguration and Status - MVRP Global MVRP status : Disabled Port Status Registration Join Leave LeaveAll Periodic Type Timer Timer Timer Timer ------- -------- -------- ----- ----- ------ -------- 1/1/1 Disabled Normal 20 300 1000 100 1/1/2 Disabled Normal 20 300 1000 100 1/1/3 Disabled Normal 20 300 1000 100