show mac-address-table address

描述

Shows MAC address table information for a specific MAC address.

Command context

Operator (>)或经理(#)

Parameters

Specifies the MAC address.

[vsx-peer]

Shows the output from the VSX peer switch. If the switches do not have the VSX configuration or the ISL is down, the output from the VSX peer switch is not displayed. This parameter is available on switches that support VSX.

权威

运营商或Administrators or local user group members with execution rights for this command. Operators can execute this command from the operator context (>) only.

Example

On the 6400 Switch Series, interface identification differs.

switch#show mac-address-table address 00:00:00:00:00:01MAC age-time : 300 seconds Number of MAC addresses : 2 MAC Address VLAN Type Port -------------------------------------------------- 00:00:00:00:00:01 2 dynamic 1/1/1 00:00:00:00:00:01 1 dynamic 1/1/1