显示界面

描述

Displays information about a specific LAG.

Command context

Operator (>) or Manager (#)

Parameters

Specifies a LAG name.

[vsx-peer]

Shows the output from the VSX peer switch. If the switches do not have the VSX configuration or the ISL is down, the output from the VSX peer switch is not displayed. This parameter is available on switches that support VSX.

Authority

Operators or Administrators or local user group members with execution rights for this command. Operators can execute this command from the operator context (>) only.

Examples

Displaying information about LAG 100:

switch#显示界面lag100Aggregate lag100 is up Admin state is up Description : MAC Address : 48:0f:cf:af:43:9c Aggregated-interfaces : 1/1/2 Aggregation-key : 100 Aggregate mode : active Speed : 2000 Mb/s L3 Counters: Rx Disabled, Tx Disabled qos trust none VLAN Mode: access Access VLAN: 1 Rx 20 input packets 2584 bytes 0 input error 0 dropped 0 CRC/FCS Tx 45 output packets 5658 bytes 0 input error 4 dropped 0 collision