power-over-ethernet quick-poe

描述

Quick PoE is a feature that provides the ability for the switch to provide power to the connected powered device as soon as switch goes through cold reboot. When quick PoE is enabled on the subsystem PoE port disablement and PD demotion is not allowed. also quick PoE enablement is not allowed if any of the port is disabled on the subsystem. User should not over-subscribe the PoE power when quick PoE is enabled. Quick PoE saved configuration will work irrespective of the configuration change at reboot.

Enables quick PoE feature on the switch or the subsystem level. By default, quick-PoE is disabled for the subsystem.

The没有form of this command disables quick PoE.

Command context

config-if

Parameters

指定模块数量快速PoE configuration .

Authority

Administrators or local user group members with execution rights for this command.

Examples

Enabling and disabling quick PoE:

switch(config)#power-over-ethernet quick-poe 1/2switch(config)#没有power-over-ethernet quick-poe 1/1

switch(config-if)#power-over-ethernet quick-poe 1/1PoE must be enabled on all interfaces before enabling Quick PoE

switch(config-if)#power-over-ethernet quick-poe 1/3All interfaces must use the default assigned class before enabling Quick PoE