power-over-ethernet assigned-class

描述

限制坡权力分配的基础上ed class. When an user assigns a maximum class to an interface, the PSE will limit the maximum power delivered to the PD up to a total power draw not exceeding the PSE assigned-class power. Power demotion occurs when a PD requested class is higher than the PSE assigned class, permitting the PD to receive power and operate in a reduced power mode. PoE ports cannot set an assigned class when Quick PoE is enabled on the sybsystem. The default assigned class is 4 for 2-pair capable PSE and 6 for 4-pair capable PSE.

The没有form of this command resets the action to default.

Command context

config-if

Authority

Administrators or local user group members with execution rights for this command.

Examples

Setting PoE assigned class:

switch(config)#interface 1/1/1switch(config-if)#power-over-ethernet assigned-class 4

Resetting PoE assigned class to default:

switch(config-if)#没有power-over-ethernet assigned-class 4

Showing Quick PoE enabled:

switch(config)#power-over-ethernet quick-poe 1/1switch(config)#interface 1/1/1switch(config)#power-over-ethernet assigned-class 4Interface assigned class cannot be configured when Quick PoE is enabled.