ipv6 mld last-member-query-interval
Syntax
ipv6 mld last-member-query-interval描述
This command configures MLD last member query interval value in seconds. The default interval-value is 1 second.
Command context
config-if
Parameters
-
区间值 -
Required: 1-2, configures MLD last-member-query-interval.
NOTE:
Default interval-value is 1 second. Use theno ipv6 mld last-member-query-intervalcommand to set interval-value to the default.
权威
Administrators or local user group members with execution rights for this command.
Example
switch(config)#interface vlan 1switch(config-if)#ipv6 mld last-member-query-interval 2switch(config-if)#no ipv6 mld last-member-query-interval