qos cos-map

Description

Defines the local priority assigned to incoming packets for a specific 802.1 VLAN priority code point (CoS) value. The CoS map values are used to mark incoming packets when QoS trust mode is set tocos. Intrust nonemode, CoS map entry 0 is used to set the port default local priority and color.

To see the default CoS map settings, use the following command:

switch#show qos cos-map defaultcode_point local_priority color name ---------- -------------- ------- ---- 0 1 green Best_Effort 1 0 green Background 2 2 green Excellent_Effort 3 3 green Critical_Applications 4 4 green Video 5 5 green Voice 6 6 green Internetwork_Control 7 7 green Network_Control

Thenoform of this command restores the assignments for a CoS map value to the default setting.

Command context

config

Parameters

Specifies an 802.1 VLAN priority CoS value. Range: 0 to 7. Default 0.

本地优先级

Specifies a local priority value to associate with theCODE-POINTvalue. Range: 0 to 7. Default: 0.

color

Reserved for future use.

name

Specifies a description for the CoS setting. The name is for identification only, and has no effect on queue configuration. Range: 1 to 64 alphanumeric characters, including period (.), underscore (_), and hyphen (-).

Authority

Administrators or local user group members with execution rights for this command.

Examples

Mapping CoS value1本地优先2:

switch(config)#qos cos-map1 local-priority 2

Mapping CoS value1to the default local priority value:

switch(config)#no qos cos-map 1