show radius-server statistics host
Syntax
show radius-server statistics authentication host {Description
Shows authentication statistics for the specified RADIUS server on the specified vrf.
Command context
Operator (>) or Manager (#)
Parameters
-
authentication -
Selects authentication statistics to show.
-
host {| | } -
Specifies the RADIUS server as:
-
tls -
建立半径连接啊ver TLS.
-
port -
Specifies the authenticated port. Range: 1 to 65535.
-
vrf -
Specifies the VRF name to be used for communicating with the server. If no VRF name is provided, the default VRF named
defaultis used. -
[vsx-peer] -
Shows the output from the VSX peer switch. If the switches do not have the VSX configuration or the ISL is down, the output from the VSX peer switch is not displayed. This parameter is available on switches that support VSX.
Authority
Operators or Administrators or local user group members with execution rights for this command. Operators can execute this command from the operator context (>) only.
Examples
Showing RADIUS server authentication statistics with TLS enabled:
switch#show radius-server statistics authentication host 20.1.1.49 tlsServer Name : 20.1.1.49 Auth-Port : 2083 Accounting-Port : 2083 VRF : default TLS Enabled : Yes Authentication Statistics ------------------------- Round Trip Time : 3 Pending Requests : 0 Timeouts : 0 Bad Authenticators : 0 Packets Dropped : 0 Access Requests : 13 Access challenge : 6 Access Accepts : 3 Access Rejects : 4 Access Response Malformed : 0