粘胶短纤renumber-to

Syntax

粘胶短纤renumber-to

描述

Renumbers VSF member 1 to a value from 2 through 10 (for 6300 devices) and 2 through 8 (for the 6200F device). Changing the member number causes the switch to reboot with the new member number. Only member 1 can be renumbered.

NOTE:

VSF links must be configured before renumbering a switch. Renumbering will be disallowed if no links are configured or there are provisioned/physically present members.

Command context

config

Parameters

Member number to which the member will be renumbered. Required.

  • Range for 6200F devices: 2-8.

  • Range for 6300 devices: 2-10.

权威

Administrators or local user group members with execution rights for this command.

Examples

Renumbering primary VSF member from 1 to 2:

switch(config)#粘胶短纤renumber-to2Member 1 cannot be renumbered until all other members are removed. switch(config)#粘胶短纤renumber-to2Member 1 cannot be renumbered until a VSF link is configured. switch(config)#粘胶短纤renumber-to2This will save the VSF configuration and reboot the switch. Do you want to continue (y/n)?y