Port LEDs
Table 1:Port LED labels
LED |
|
1 |
QSFP+ port lane LEDs — these LEDs are not used by the product and should remain off throughout the product's operation |
2 |
SFP+ port LEDs |
3 |
QSFP+ port 51, 54 LEDs |
4 |
QSFP+ port 49, 50, 52, 53 LEDs |
5 |
Out-of-band management port Link LED |
6 |
Out-of-band management port Act (activity) LED |
表2:Port LED behavior
Chassis LEDs |
Function |
State |
Meaning |
SFP+ port LEDs |
To display link and activity information for the port. |
On/flashing green |
Shows a valid link at 1 Gbps or 10 Gbps. Flashing indicates port activity. |
Slow flash amber |
When the Global Status LED is flashing amber, indicates an unsupported transceiver or a port failure. |
||
QSFP+ port LEDs |
To display link and activity information for the port. |
On/flashing green |
Shows a valid link at 40 Gbps. Flashing indicates port activity. |
Off |
When the Global Status LED is flashing amber, indicates an unsupported transceiver or a port failure. |
||
Management port Link LED |
显示链接有限公司mation for the port. |
On green |
Shows a valid link. |
Management port Act LED |
To display activity information for the port. |
Flashing green |
Flashing indicates port activity. |
