紧密相联的w-unsupported-transceiver

紧密相联的w-unsupported-transceiver [confirm | log-interval {none |})

no allow-unsupported-transceiver

Description

Allows unsupported transceivers to be enabled or establish connections. Transceivers with speeds up to 100G are enabled by this command.

The 8400 Series Switches will enable unsupported transceivers for speeds up to 100G when runningAOS-CX10.10 or later.

Thenoform of this command disallows using unsupported transceivers.

Parameter	Description
confirm	Specifies that unsupported transceiver warnings are to be automatically confirmed.
log-interval none	Disables unsupported transceiver logging.
log-interval	Sets the unsupported transceiver logging interval in minutes. Default: 1440 minutes. Range: 1440 to 10080 minutes.

Usage

When none of the parameters are specified it will display a warning message to accept the warranty terms. Withconfirmoption the warning message is displayed but the user is not prompted to(y/n)answering. Warranty terms must be agreed to as part of enablement and the support is on best effort basis.

Examples

Allowing unsupported transceivers with follow-up confirmation:

switch(config)#紧密相联的w-unsupported-transceiverWarning: The use of unsupported transceivers, DACs, and AOCs is at your own risk and may void support and warranty. Please see HPE Warranty terms and conditions. Do you agree and do you want to continue (y/n)?y

Allowing unsupported transceivers with confirmation in command syntax:

switch(config)#紧密相联的w-unsupported-transceiver confirmWarning: The use of unsupported transceivers, DACs, and AOCs is at your own risk and may void support and warranty. Please see HPE Warranty terms and conditions.

Configuring unsupported transceiver logging with an interval of every 48 hours:

switch(config)#紧密相联的w-unsupported-transceiver log-interval 2880

禁用不支持收发器日志:

switch(config)#紧密相联的w-unsupported-transceiver log-interval none

Disallowing unsupported transceivers with follow-up confirmation:

switch(config)#no allow-unsupported-transceiverWarning: Unsupported transceivers, DACs, and AOCs will be disabled, which could impact network connectivity. Use 'show allow-unsupported-transceiver' to identify unsupported transceivers, DACs, and AOCs. Continue (y/n)?y

Disallowing unsupported transceivers with confirmation in command syntax:

switch(config)#no allow-unsupported-transceiver confirmWarning: Unsupported transceivers, DACs, and AOCs will be disabled, which could impact network connectivity. Use 'show allow unsupported-transceiver' to identify unsupported transceivers, DACs, and AOCs. switch(config)#

Command History

Release	Modification
10.10	Up to 100G support enabled for unsupported transceivers on 8400 (up to 100G) series switches in UT mode.
10.07 or earlier	--

Command Information

Platforms	Command context	Authority
8400	config	Administrators or local user group members with execution rights for this command.