show ip pim (PIM-SM)

show ip pim [all-vrfs | vrf] [vsx-peer]

Description

Shows the PIM router information. Optionally, you can specify display information by VRF. If no options are specified, it shows information for the default VRF.

Parameter	Description
all-vrfs	Shows PIM router information on all VRFs.
vrf	Specifies the name of a VRF. Default: default.
vsx-peer	Shows the output from the VSX peer switch. If the switches do not have the VSX configuration or the ISL is down, the output from the VSX peer switch is not displayed. This parameter is available on switches that support VSX.

Usage

• Multicast NSF is not supported for PIM RP enabled switches, therefore some transient traffic loss is expected during ISSU on RP routers where both PIM and MSDP are enabled.
• When PIM NSF status is inactive, the PIM NSF Time Remaining information is not shown.

Example

Showing IP PIM router information:

Command History

Release	Modification
10.10	Added NSF information: PIM NSF status, PIM NSF Time Remaining
10.07 or earlier	--

Command Information

Platforms	Command context	Authority
8400 9300	Operator (>) or Manager (#)	Operators or Administrators or local user group members with execution rights for this command. Operators can execute this command from the operator context (>) only.