Known issues for 6100 SwitchesinAOS-CX10.06.0220

The following are known open issues with this branch of the software. TheSymptomstatement describes what a user might experience if this is seen on the network. TheScenariostatement provides additional environment details and trigger summaries. When available, theWorkaroundstatement provides a workaround to the issue.

Category	Bug ID	Description
Physical Interfaces	166244	Symptom: Running cable diagnostics on 1GBASE-T ports on 4100i, 6000, 6100, 6200, 6300, 6400 connected to an Aruba AP-515 access point will show inconsistent results in cable diagnostic status fluctuating betweenopenandgood. Scenario: Customer has multiple 6200F switches connected to multiple IAP-515's in their network, observes cable diagnostic status fluctuating betweenopenandgood当运行电缆诊断CAT5e和CAT6 cables of approximately 60 meters. This inconsistent cable diagnostic status is also observed on AP-515 in lab, which has the same hardware as the IAP-515, but only with shorter cable lengths of approximately 1.5 meters. Using longer cables of around 60 meters does not reproduce the fluctuating cable diagnostic status in the lab.

Category

Bug ID

Description

Physical Interfaces

166244

Symptom: Running cable diagnostics on 1GBASE-T ports on 4100i, 6000, 6100, 6200, 6300, 6400 connected to an Aruba AP-515 access point will show inconsistent results in cable diagnostic status fluctuating betweenopenandgood.

Scenario: Customer has multiple 6200F switches connected to multiple IAP-515's in their network, observes cable diagnostic status fluctuating betweenopenandgood当运行电缆诊断CAT5e和CAT6 cables of approximately 60 meters. This inconsistent cable diagnostic status is also observed on AP-515 in lab, which has the same hardware as the IAP-515, but only with shorter cable lengths of approximately 1.5 meters. Using longer cables of around 60 meters does not reproduce the fluctuating cable diagnostic status in the lab.