Known issues
for 8320 SwitchesinAOS-CX10.09.1040
The following are known open issues with this branch of the software. TheSymptomstatement describes what a user might experience if this is seen on the network. TheScenariostatement provides additional environment details and trigger summaries. When available, theWorkaroundstatement provides a workaround to the issue.
Category |
Bug ID |
Description |
Boot Process |
216818 |
Symptom: The output of theshow boot-historycommand displays an incorrect uptime. Scenario: This issue can occur in a deployment with NTP and Aruba Central enabled, if the switch fails to connect with Aruba Central and continues to retry. Workaround: The customer can disable Aruba Central using the following CLI command. switch (config)# aruba-central switch (config-aruba-central)# disable |
CLI Infra |
211466 |
Symptom: The user session does not timeout. Scenario:当开关康索尔e is left idle, with a CLI command output in progress, waiting for user input to display the next page, the user session does not timeout when the configured timer expires. |
OSPF |
160179 |
Symptom/Scenario:ABR does not inject the default route in a Totally Stubby Area with loopback in Area 0.0.0.0. 处理:Assign one or more physical interfaces to Area 0.0.0.0. |
