Guide descriptions

This document contains reference information for the CLI commands for theAOS-CXnetwork operating system.

This guide includes syntax, parameters, options, context, and authority required for all commands supported.

这个文档包含formation about Access Control Lists (ACLs) and classifier policies for theAOS-CXnetwork operating system

This guide includes:

• Access Control Lists (ACLs)
• ACL configuration examples
• Classifier policies
• Classifier policy configuration examples
• ACL and policy hardware resource considerations
• High capacity TCAM

CoPP provides a way to for administrators to protect the management processor on the switch from high packet loads (generated by malicious or nonmalicious sources) that might interfere with its ability to keep data plane traffic flowing.

This guide provides information on CoPP and how it is configured.

This document provides information on how to diagnose issues withAOS-CX. Topics include:

• Debug logging
• Log rotation
• Finding events
• Cable diagnostics
• Event logs
• Supportability copy
• Traceroute
• Ping
• Remote syslog
• Runtime diagnostics
• ServiceOS
• In-System programming
• Selftest
• Zeroization
• Terminal Monitor
• Troubleshooting Web UI and REST API access issues

这个文档包含formation for getting started with theAOS-CXnetwork operating system. Only basic information on each topic is provided. Further detail is found in the other guides. Topics include:

• Introduction to the OS
• CLI session commands
• Initial configuration

  ZTP

  Aruba CX mobile app

  CLI

  Banners

  In-band management

  Network Time Protocol (NTP)

  Precision Time Protocol (PTP)

  Restore factory default

• Interface configuration
• Source interface selection
• VLANs
• Configuration and firmware management
• Dynamic segmentation
• SNMP
• CoPP
• Aruba Central integration
• Port filtering
• DNS
• Device discovery and configuration

  LLDP

  CDP

• DCBx
• Zero Touch Provisioning
• Switch system and hardware commands

这个文档包含formation about the high availability functionality of theAOS-CXnetwork operating system. Management Module failover and high availability commands are discussed.

Bidirectional Forwarding Detection (BFD) and Ethernet Ring Protection Switching (ERPS) are also covered in this guide.

This document provides an introduction to theAOS-CXWebUI. The Web UI provides quick and easy visibility into what is happening on the switch.

This document contains IP routing reference information for theAOS-CXnetwork operating system.

This guide includes:

• Virtual Routing and Forwarding (VRF)
• Loopback
• Static routing
• Open Shortest Path First (OSPF) versions 2 and 3
• Border Gateway Protocol (BGP)
• Route policies and route maps
• Equal Cost Multipath (ECMP)
• Virtual Router Redundancy Protocol (VRRP)
• Inter-Virtual Router Forwarding (IVRF)
• Policy Based Routing (PBR)
• IP Directed Broadcast
• IP Neighbor Flood
• Key chain
• IP Client Tracker
• Routing Information Protocol (RIP)

这个文档包含formation for configuring IP services on theAOS-CXnetwork operating system.

This guide includes:

• IRDP
• IPv6 router advertisement
• sFlow
• DHCP
• DHCP snooping
• ND Snooping
• IP tunnels
• IP source lockdown
• Internet Control Message Protocol (ICMP)
• DNS
• ARP
• Network Load Balancing (NLB)

这个文档包含formation for configuring the Job Scheduler, which can be used to execute batches of CLI commands on a user-configured schedule or interval.

这个文档包含formation for configuring layer 2 bridging with theAOS-CXnetwork operating system.

This guide includes:

• MAC address table
• VLANs
• Loop protection
• Spanning tree protocols
• MVRP
• UDLD

Provides information on configuring Link Aggregation Groups (LAGs).

这个文档包含formation about the monitoring functionality of theAOS-CXnetwork operating system.

This guide includes:

• Member, slot, and port notation
• Monitoring hardware through visual observation
• LEDs
• Boot commands
• 外部存储
• IP-SLA
• L1 100Mbps downshift
• Mirroring
• Monitoring the device using SNMP
• Power over Ethernet
• Breakout cable support
• AirWave

这个文档包含formation about the Multiprotocol Label Switching (MPLS) routing.

This guide includes:

• standar MPLS协议和功能ds
• Configuration task lists
• Use Cases
• MPLS commands
• Debugging and troubleshooting information

这个文档包含formation about multicast functionality of theAOS-CXnetwork operating system.

This guide includes:

• Multicast overview
• Internet Group Management Protocol (IGMP)
• IGMP snooping
• MLD snooping
• Protocol Independent Multicast - Sparse Mode (PIM-SM)
• Protocol Independent Multicast - Dense Mode (PIM-DM)
• Multicast Source Discover Protocol (MSDP)
• mDNS gateway

This document describes theAOS-CXNetwork Analytics Engine, including information about example use cases for the Network Analytics Engine, creating agents that use Network Analytics Engine scripts, using scripts provided by Hewlett Packard Enterprise, finding and using scripts written by others, and creating your own scripts.

Topics include:

• Overview
• Framework
• Managing scripts
• Managing agents
• Troubleshooting agent and script issues
• Using the Aruba Solutions Exchange (ASE)
• NAE scripts repository on GitHub
• Scripts and security
• Scripts
• Agents
• NAE commands
• HTTPS server commands

这个文档包含formation for configuring quality of service (QoS) onAOS-CX.

These guides (one for RESTv1 and one for RESTv10.04) describe theAOS-CXREST API. It is intended for experienced users who require a programmatic interface to the switch and understand the schema and data relationships of the switch as modeled by the switch configuration database.

Topics include:

• Introduction to theAOS-CXREST API
• Enabling access to the API
• Accessing the REST API
• AOS-CXREST API reference
• Using curl commands
• VSX peer switches and REST API access
• Troubleshooting

这个文档包含formation about authentication for theAOS-CXnetwork operating system.

Topics include:

• Managing local users and groups
• SSH server and client
• Local AAA
• Remote AAA with TACACS+
• Remote AAA with RADIUS
• RADIUS dynamic authorization
• PKI
• Captive portal (RADIUS)
• Enhanced security
• Auditors and auditing tasks
• Port access commands
• Port security
• Fault Monitor

This guide provides information on configuring SNMP onAOS-CX. Information on the MIBs available onAOS-CXis also provided.

Virtual Switching Framework, or VSF, defines a virtual switch, comprising multiple individual physical switches, interconnected through standard Ethernet links. VSF applies only to the 6300 Switch Series.

Topics include:

• Stack management
• Failure and recovery
• Configuring a VSF stack
• VSF restrictions

NOTE:VSF features are available on 6200 and 6300 Switches.

VSX binds twoAOS-CXswitches of the same model type to operate as one device for layer 2. VSX also operates as independent nodes for layer 3.

Topics include:

• Upgrading to the latest version of VSX
• Setting up the VSX environment
• Enabling VSX configuration synchronization
• Monitoring VSX
• Preventing traffic loss
• SPT and VSX
• Loop protect configurations over VSX
• EVPN VSX support
• Upstream connectivity
• Troubleshooting

NOTE:VSX features are available on 6400, 83XX and 10000 Series Switches.