• All Files
ArubaOS 8.6.0.0Help Center
You are here: Home > Management Access > Configuring Centralized Image Upgrades > Configuring Upgrade Profile of Mobility Masters

Configuring Upgrade Profile ofMobility Master

The following procedure describes how to configure an upgrade profile for theMobility Master.

1.In theMobility Masternode hierarchy, navigate toMaintenance > Software Management > Upgrade.

2.Configure the parameters described in the following table:

Table 1:Upgrade Image Parameters forMobility Master

Parameter

Description

Upgrade using

Select the protocol used to download the image file.

FTPFile Transfer Protocol. A standard network protocol used for transferring files between a client and server on a computer network.

Local File

SCPSecure Copy Protocol. SCP is a network protocol that supports file transfers between hosts on a network.

TFTPTrivial File Transfer Protocol. The TFTP is a software utility for transferring files from or to a remote host.

USBUniversal Serial Bus. USB is a connection standard that offers a common interface for communication between the external devices and a computer. USB is the most common port used in the client devices.

Server IP address

Specify the IPv4 address of the image server.

NOTE:Specify this parameter ifSCP,FTP, orTFTPis used as the protocol to download the image file.

Image file name

Specify the image file name.

NOTE:Use theBrowsebutton to navigate to the image file ifLocal Fileis used as the protocol to download the image file.

Username

Specify the username to log in to the image server.

NOTE:Specify this parameter ifFTPorSCPis used as the protocol to download the image file.

Password

Specify the password to log in to the image server.

NOTE:Specify this parameter ifFTPorSCPis used as the protocol to download the image file.

Partition to upgrade

Select the partition to upgrade.

Reboot controller after upgrade

Enable the toggle switch to reboot theMobility Masterafter upgrade.

Save current configuration

Select the check box if the existing configuration on theMobility Master应该是年代aved before rebooting.

NOTE:The existing configuration on theMobility Masteris saved before it is rebooted only if theReboot controller after upgradetoggle switch is enabled.

3.ClickUpgrade.

/*]]>*/
Baidu