Defining the Backup Configuration

The following procedure describes how to define the backup configuration:

1.In theManaged Networknode hierarchy, navigate to theConfiguration > System > Profilestab.

2.SelectWireless LAN >虚拟美联社underAll Profiles.

3.Click+in虚拟美联社profileand enter the profile name.

4.ClickSave.

Whenever you create a new virtual AP profile in the WebUI, the profile automatically contains the defaultSSIDService Set Identifier. SSID is a name given to a WLAN and is used by the client to access a WLAN network.profile with the default西文SID扩展服务集标识符。西文SID refers to the ID used for identifying an extended service set.. You must configure a new西文SID扩展服务集标识符。西文SID refers to the ID used for identifying an extended service set.andSSIDService Set Identifier. SSID is a name given to a WLAN and is used by the client to access a WLAN network.profile for the virtual AP profile before you apply the profile.

a.Click+next to the profile created.

b.ClickAAAand select a previously configuredAAAAuthentication, Authorization, and Accounting. AAA is a security framework to authenticate users, authorize the type of access based on user credentials, and record authentication events and information about the network access and network resource consumption.profile from theAAA Profiledrop-down list.

c.ClickSave.

d.ClickSSIDand select the previously configuredSSIDService Set Identifier. SSID is a name given to a WLAN and is used by the client to access a WLAN network.profile from theSSID Profiledrop-down list.

e.ClickSave.

5.Select the new virtual AP name listed underWireless LAN >虚拟美联社, to view the configuration parameters.

6.In theGeneralaccordion under虚拟美联社profile: name, execute the following:

a.Ensure that the虚拟美联社enablecheck box is selected.

b.Enter theVLANVirtual Local Area Network. In computer networking, a single Layer 2 network may be partitioned to create multiple distinct broadcast domains, which are mutually isolated so that packets can only pass between them through one or more routers; such a domain is referred to as a Virtual Local Area Network, Virtual LAN, or VLAN.ID to be used for the Virtual AP profile in theVLANfield.

c.Selectbridgefrom theForward modedrop-down list.

d.ClickSave.

7.UnderAll Profiles, selectAP>AP systemprofile.

8.UnderProfile Details, execute the following:

a.Select the AP system profile that you want to edit.

b.Under theLMS Settingsaccordion, enter theLMSLocal Management Switch. In multi-controller networks, each controller acts as an LMS and terminates user traffic from the APs, processes, and forwards the traffic to the wired network.IP address in theLMS IPfield.

c.Under theRemote APaccordion, enter theRemote APRemote APs extend corporate network to the users working from home or at temporary work sites. Remote APs are deplyed at branch office sites and are connected to the central network on a WAN link.PDHCPDynamic Host Configuration Protocol. A network protocol that enables a server to automatically assign an IP address to an IP-enabled device from a defined range of numbers configured for a given network.server name in theRemote-AP DHCP Serverfield.

d.ClickSave.

9.ClickPending Changes.

10.In thePending Changeswindow, select the check box and clickDeploy changes.

The followingCLICommand-Line Interface. A console interface with a command line shell that allows users to execute text input as commands and convert these commands to appropriate functions.commands define the backup configuration:

(host) [mynode] (config) #wlan ssid-profile

essid

opmode

wpa-passphrase (if necessary)

(host) [mynode] (config) #wlan virtual-ap

ssid-profile

vlan

forward-mode bridge

aaa-profile

rap-operation {always|backup}

(host) [mynode] (config) #ap system-profile

lms-ip

master-ip

rap-dhcp-default-router

rap-dhcp-dns-server

rap-dhcp-lease

rap-dhcp-pool-end

rap-dhacp-pool-netmask

rap-dhcp-pool-start

rap-dhcp-server-id

rap-dhcp-server-vlan

(host) [mynode] (config) #ap-group

virtual-ap

ap-system-profile

or

(host) [mynode] (config) #ap-name

virtual-ap

ap-system-profile