ble_relay {export-ap-ble-ibeacon-info | send_sync_iotcfg | set-attr
Description
This command configures the Bluetooth Low Energy (BLE) relay on devices.
Parameter |
Description |
export-ap-ble-ibeacon-info |
Exports AP's BLE radio iBeacon parameters to a CSV file. |
send_sync_iotcfg |
Sends synchronized IoT configurations to the APs. |
set-attr |
Sets the attribute value. |
Initiates or terminates the tag report logging. This action is completed using binary numbers, for example 1: initiate, 0: terminate. |
|
Initiates or terminates the web-socket connection. This action is completed using binary numbers, for example, 1: initiate, 0: terminate. |
|
Provides the log levels to debug a web-socket connection. |
Example
The following command exports the AP's BLE iBeacon information into a CSV file:
(主机)[mynode] # ble_relay export_ap_ble_ibeacon_info
ble_info.txt file ready to be copied out
======================================================
Command History
Release |
Modification |
ArubaOS8.4.0.0 |
The |
ArubaOS8.2.0.0 |
Command introduced. |
Command Information
Platforms |
License |
Command Mode |
All platforms |
Base operating system. |
Enable mode on theMobility Conductor. |
