ip probe default

ip probe default

burst-size

频率<秒>

mode ping

no

retries

Description

This command configures IP probes for the policy-based routing using a next-hop list. The health-check feature uses ping-probes to check reachability and latency from themanaged deviceto data center though each of themanaged device's WAN up-links. Latency is calculated based on the round-trip time (RTT) of ping responses. Ping settings are configured globally using theip probe defaultcommand.

Parameter	Description
burst-size	Number of probes to be sent during the probe frequency interval defined by thefrequencyparameter of this profile. Range:1-16 Default:5
频率<秒>	Probe interval, in seconds. The WAN health-check feature sends the number of probes defined by theburst-sizeparameter during each frequency interval defined by thisfrequencyparameter. Range:10-3600 Default:10
mode ping	Enable this feature by issuing themode pingcommand. Ping is the only mode currently supported by this feature.
no	Remove or negate any configured parameter.
retries	Number of times themanaged deviceattempts to resend a probe. Range:1-255 Default:3

Examples

The following commands enable this feature, and reduce the default probe frequency interval and probe burst size:

Related Commands

Command	Description
ip probe health-check	This command configures WAN health-check ping-probes for measuring WAN availability and latency onmanaged deviceup-links.

Command History

Release	Modification
ArubaOS8.0.0.0	Command introduced.

Command Information

Platform	License	Command Mode
All platforms	Available in the base operating system.	配置模式Mobility Conductor.