lc-cluster group-profile

Enter the cluster profile name you want to create.

Enable load balancing of APs by load sharing active AACs among cluster members.

Specify the number of APs when active AP rebalance is initiated.

Redistribute active AP load when active load on any cluster is beyond this configured percentage.

Time, in minutes, to initiate the active AP rebalancing operation.

Redistribute active AP load when thecontrollerreaches the rebalance threshold and the difference between the maximum and minimum load on thecontrolleris more than this threshold percentage.

Redistribute active client load when active load on any cluster node is beyond this configured percentage

Copy data from anothercontrollercluster profile.

Managed deviceto be made part of this cluster. The IPv4 Address is the value of thecontroller-ip

Defines the priority level for themanaged devices

Enter the multicast vlan

Configure the VIP address that will be owned by the elected VRRP master.

Specifies the VLAN ID of the VLAN on which VRRP will run.

The value of the parameter is an integer and the range is 1-12. The value 0 is the unset value if you do not want to group themanaged devices.

Controllerto be made part of this cluster. The IPv6 address is the value of thecontroller-ip.

The value of the parameter is an integer and the range is 1-12. The value 0 is the unset value if you do not want to group themanaged devices.

Enter the multicast VLAN to be used for forwarding multicast traffic to upstream router.

Define the priority level for themanaged devices. The value of this parameter is in the range of 1-255. The default value is 128.

Configure the IPv6 address that is owned by the elected VRRP master.

Heartbeat threshold is the time in ms that the cluster will wait before declaring a peer cluster node as dead. By default, the value is 900 ms.

Enable load sharing redundancy among cluster members.

Enables the cluster behind NAT for Remote APs.

Redistribute standby client load when total load on any cluster node is beyond this configured percentage

Indicates the minimum difference in load percentage between max loaded cluster node and min loaded cluster node to let load balancing algorithm kick in.

This is an optional parameter which specifies the starting VRRP ID for cluster members. If this is not configured, system automatically configures VRRP groups within the range of 220-225.