rf optimization-profile
clone
handoff-assist
low-rssi-threshold
no ...
rssi-check-frequency
rssi-falloff-wait-time < number>
Description
This command configures the RF optimization profile.
Parameter |
Description |
Name of this instance of the profile. The name must be 1-63 characters. default |
|
clone |
Name of an existing optimization profile from which parameter values are copied. |
handoff-assist |
Allows thecontrollerto force a client off an AP when the RSSI drops below a defined minimum threshold. disabled |
low-rssi-threshold |
Minimum RSSI, above which deauth should never be sent. 1-255 10 |
no |
Negates any configured parameter. |
rssi-check-frequency |
Interval, in seconds, to sample RSSI. 9-255 seconds 3 seconds |
rssi-falloff-wait-time < number> |
Number of times the detected client RSSI level must fall below the minimum RSSI threshold the before the AP sends a deauthorization message to the client. The maximum value is 8 times. 0-8 4 |
Example
The following command configures an RF optimization profile:
(host)[node](config) #rf optimization-profile Angela1
(host)[node](RF Optimization Profile "Angela1") #rssi-falloff-wait-time 3
(host)[node](RF Optimization Profile "Angela1") #rssi-check-frequency 2
Command History
Release |
Modification |
ArubaOS8.0.0.0 |
Command introduced. |
Command Information
Platforms |
License |
Command Mode |
All platforms |
Base operating system. |
配置模式Mobility Conductor. |
