secondary master-ip

secondary masterip [ipsec | ipsec-custom-cert | ipsec-factory-cert | vpn-ip]

Description

Use this command to add a secondaryMobility Conductorfrom the primaryMobility ConductorCLI. This command is allowed in the/md树,在设备节点and group nodes.

Parameter	Description
secmasterip_val	Configure the master ip address or FQDN.
ipsec	IPSec key of length 64 bytes.
fqdn	The Local's FQDN (max 64 bytes) used in IKE. This is optional for a Dynamically addressed Local
interface	Vlan interface to initiate IKE. The switch IP will be used if the vlan is not specified.
peer-mac-1	Specify peer MAC string.
ipsec-custom-cert	Custom Cert-based IPSec secure communication between master / conductorand local.
master-mac-1-c	Specify Master's /Conductor'sMAC address.
ipsec-factory-cert	Factory Cert-based IPSec secure communication between master / conductorand local.
master-mac-1-c	Specify Master's /Conductor'sMAC address.
ca-cert	Specify the CA certificate to use.
master-mac-2-c	Specify the redundant master's MAC address.
vpn-ip	VPN concentrator's IP address or FQDN.

The following command enables you to add a secondaryMobility Conductor.

(host) [md] (config) #secondary masterip

Command	Description
master-l3redundancy/conductor-l3redundancy	Configures Layer-3 redundancy for aMobility Conductor.

Release	Modification
ArubaOS8.2.0.0	Command introduced.

Platforms	License	Command Mode
All platforms	Base operating system.	配置模式Mobility Conductor.