show airmatch profile

Description

This command displays the configuration settings in the AirMatch profile.

Example

In this example, the output has been divided into multiple sections to better fit on the pages of this document. In the actual CLI, the output appears in a single, long table.

(host)[mm] #show airmatch profile

AirMatch profile (Predefined (changed))

---------------------------------------

Parameter Value

--------- -----

schedule Enabled

deploy-hour 5 o'clock

quality-threshold 15 percent

The output of this command includes the following parameters:

Column	Description
Schedule	Indicates if AirMatch scheduled updates are enabled. If the AirMatch updates are changed from the defaultenabledsetting todisabled,Mobility Conductorcontinues to receive RF updates from the APs, but no channel and EIRP changes are executed by theMobility Conductorat the scheduled time.
deploy-hour <0-23>	Specify a number from 0-23 to select the hour during which AirMatch updates are sent to the APs (in 24-hour format).
eirp-offset	Manually adjust EIRP levels selected by the AirMatch algorithm by specifying a value from -6 to 6 dBm
quality-threshold	The`quality-threshold`parameter represents the percentage of channel quality improvement that will trigger an AirMatch RF update. If a proposed channel change does not produce an improvement that meets or exceeds this threshold, AirMatch will not trigger a channel change.

Related Commands

Command	Description
airmatch profile	这个命令配置AirMatchprofile.
airmatch ap	A radio set with the`airmatch ap freeze`command uses a static radio configuration until those settings get explicitly canceled with the`airmatch ap unfreeze`command.

Command History

Release	Modification
ArubaOS8.1.0.0	The`eirp-offset`parameter is deprecated. EIRP offset values can now be configured for AP groups via therf dot11a-radio-profileandrf dot11g-radio-profilecommands.
ArubaOS8.0.1.0	The`quality-threshold`parameter is introduced.
ArubaOS8.0.0.0	Command introduced.

Command Information

Platforms	License	Command Mode
All platforms	Base operating system.	Enable or Config mode onMobility Conductor.