show ap load balancing
Description
This command shows the load-balancing information for each AP with load balancing enabled.
Examples
The output of the command in the example below shows details for a single AP enabled with the load-balancing feature.
(host) [mynode] #show ap load-balancing
Load Balance Enabled Access Point Table
---------------------------------------
bss ess name s/p ip phy chan cur-cl util(kbps)
--- --- ---- --- -- --- ---- ------ ----------
00:0b:86:cc:8e:4e Wireless_1 mp22 2/24 10.3.148.12 a-HT 413 3 14
The output of this command includes the following information:
Column |
Description |
BSS |
证一致格fier for the AP. This is usually the APs MAC address. |
ESS |
The ESS Identifier is the user-defined name of an 802.11 wireless network. |
s/p |
Thecontrollerslot and port used by the AP, in the format |
ip |
IP address of the AP. |
体育
|
Displays one of the following 802.11 radio types: a a-HT (high-throughput) g g-HT (high-throughput) |
Phy-type ( |
Displays one of the following 802.11 radio types: 2.4GHz 5GHz 6GHz |
chan |
Channel number for the AP 802.11a/802.11n physical layer. The available channels depend on the AP’s regulatory domain (country). |
cur-cl |
Current number of clients on the AP. |
util (kbps) |
Current bandwidth utilization, in kbps. |
Related Commands
Command |
Description |
This manages and configures the uplink network connection. |
Command History
Release |
Modification |
ArubaOS8.9.0.0 |
The command output was modified to include the following changes ( Replaced Replacedaandgwith5GHzand2.4GHz值。 Introduced6GHzvalue for Wi-Fi 6E APs. |
ArubaOS8.0.0.0 |
Command introduced. |
Command Information
Platforms |
License |
Command Mode |
All platforms |
Base operating system. |
Enable mode onMobility Conductor. |
