show ap mesh-cluster-profile

show ap mesh-cluster-profile []

Description

This command shows configuration settings for a mesh cluster profile. The commandshow ap mesh-cluster-profiledisplays a list of all mesh cluster profiles configured on theMobility Conductor, including the number of references to each profile and each profile’s status. Include the optional parameter to show detailed settings for an individual mesh cluster profile.

Parameter	Description
	Name of a mesh cluster profile

Examples

The example below shows the configuration settings for the mesh cluster profile “meshcluster2”.

The output of this command includes the following information:

Parameter	Description
Cluster Name	网格集群使用此资料的名称e
RF band	The RF band in which the AP should operate: g= 2.4 GHz a= 5 GHz
Encryption	Data encryption setting for the mesh cluster profile. opensystem—No authentication and encryption. wpa2-psk-aes—WPA2 with AES encryption using a preshared key.
WPA Hexkey	The WPA PSK (only for mesh cluster profiles using WPA2 with AES encryption).
WPA Passphrase	The WPA password that generates the preshared key (only for mesh cluster profiles using WPA2 with AES encryption).

Related Commands

Command	Description
ap mesh-cluster-profile	This command configures a mesh cluster profile used by mesh nodes.

Command History

Release	Modification
ArubaOS8.0.0.0	Command introduced.

Command Information

Platforms	License	Command Mode
All platforms	This show command is available in the base operating system. Commands to configure the mesh feature require the Mesh license.	Enable or Config mode onmanaged devices.