show ap provisioning-profile

show ap provisioning-profile []

Description

This command shows information for AP provisioning profiles. The AP provisioning profile allows you to define a set of provisioning parameters to an AP group. These settings can be saved or assigned to an AP group via the commandap-group provisioning-profile .

Issue this command without theoption to display the entire AP provisioning profile list, including profile status and the number of references to each profile. Include a profile name to display the authorization group defined for that profile.

Parameter	Description
	The name of an existing AP provisioning profile.

Examples

The following example lists all AP provisioning profiles. TheReferencescolumn lists the number of other profiles with references to that provisioning profile, and theProfile Statuscolumn indicates whether the profile is predefined. User-defined AP provisioning profiles will not have an entry in theProfile Statuscolumn.

(host) [mynode] #show ap provisioning-profile

Provisioning profile List

-------------------------

Name References Profile Status

---- ---------- --------------

default 12

outdoor 3

To display the configuration settings for an individual profile, include the parameter. The following example shows the profile details for the AP provisioning profileDefault:

(host) [mynode] #show ap provisioning-profile default

Provisioning profile "default"

------------------------------

Parameter Value

--------- -----

Remote-AP No

Master /ConductorIP/FQDN N/A

PPPOE User Name N/A

PPPOE Password N/A

PPPOE Service Name N/A

USB User Name N/A

USB Password N/A

USB Device Type none

USB Device Identifier N/A

USB Dial String N/A

USB Initialization String N/A

USB TTY device data path N/A

USB TTY device control path N/A

USB modeswitch parameters N/A

Link Priority Ethernet 0

Link Priority Cellular 0

Cellular modem network preference auto

Username of AP so that AP can authenticate to 802.1X using PEAP N/A

Password of AP so that AP can authenticate to 802.1X using PEAP N/A

Enable AP to 802.1x using EAP-TLS Disabled Enable AP to use factory certificates when doing 802.1x EAP-TLS Disabled AP dot1x EAP-TLS username suffix Enabled AP dot1x EAP-TLS username suffix domain google.com

Uplink VLAN 0

USB power mode auto

AP POE Power optimization false

Master /ConductorPreference IPv4

该命令的输出包括以下parameters:

Parameter	Description
Remote-AP	Indicates that the profile is associated with a remote AP using certificates.
Master /ConductorIP/FQDN	The FQDN or IP address forMobility Conductor.
PPPOE User Name	PPPoE username for the AP.
PPPOE Password	PPPoE password for the AP.
PPPOE Service Name	PPPoE service name for the AP.
USB User Name	The PPP username provided by the cellular service provider
USB Password	A PPP password, if provided by the cellular service provider
USB Device Type	The USB driver type.
USB Device Identifier	The USB device identifier.
USB Dial String	The dial string for the USB modem. This parameter only needs to be specified if the default string is not correct.
USB Initialization String	The initialization string for the USB modem. This parameter only needs to be specified if the default string is not correct.
USB TTY device data path	The TTY device path for the USB modem. This parameter only needs to be specified if the default path is not correct.
USB TTY device control path	The TTY device control path for the USB modem. This parameter only needs to be specified if the default path is not correct.
USB modeswitch parameters	All the parameters that is required to be passed to the USB mode switch utility.
Link Priority Ethernet	Set the priority of the wired uplink, from 0-255. Each uplink type has an associated priority; wired ports having the highest priority by default.
Link Priority Cellular	The priority of the cellular uplink, from 0-255. By default, the cellular uplink is a lower priority than the wired uplink; making the wired link the primary link and the cellular link the secondary or backup link.
Cellular modem network preference	Multi-mode cellular modem network preference type.
Username of AP so that AP can authenticate to 802.1X using PEAP	If your AP uses PEAP authentication, this field displays the AP username.
Password of AP so that AP can authenticate to 802.1X using PEAP	If your AP uses PEAP authentication, this field displays the AP password.
Enable AP to 802.1x using EAP-TLS	Enables AP to perform 802.1x authentication using EAP-TLS.
Enable AP to use factory certificates when doing 802.1x EAP-TLS	Enables AP to use the factory certificates to perform 802.1x EAP-TLS authentication.
AP dot1x EAP-TLS username suffix	Enables AP to use EAP-TLS username suffix.
AP dot1x EAP-TLS username suffix domain	Sets the suffix domain for AP dot1x EAP-TLS username. If defined, use EAP-TLS username as suffix, else usearuba.ap.
Uplink VLAN	If you configured an uplink VLAN on an AP connected to a port in trunk mode, the AP sends and receives frames tagged with this VLAN on its Ethernet uplink. By default, an AP has an uplink vlan of 0, which disables this feature.
USB power mode	The USB power mode to control the power to the USB port.
AP POE Power optimization	Displays the AP POE power optimization status.
Master /ConductorPreference	显示AP的首选IP协议master /conductordiscovery.

Related Command

Command	Description
provision-ap	Change provisioning parameters for an individual AP. This command does not save the provisioning parameters settings in a reusable profile.

Command History

Release	Modification
ArubaOS8.9.0.0	All instances of`master`have been replaced with`conductor`.
ArubaOS8.7.0.0	The`Master Preference`parameter was added to the output of the`show ap-provisioning profile`command.
ArubaOS8.4.0.0	The following parameters were added to the output of the`show ap-provisioning profile`command: `AP dot1x EAP-TLS username suffix` `AP dot1x EAP-TLS username suffix domain` `USB power mode`
ArubaOS8.0.0.0	Command introduced.

Command Information

Platforms	License	Command Mode
All platforms	Base operating system.	Enable mode onMobility Conductor.