show ap radio-summary

show ap radio‑summary

ap-group

ap-name

dot11a ( For versions prior toArubaOS8.9.0.0)

dot11g ( For versions prior toArubaOS8.9.0.0)

2.4GHz ( ArubaOS8.9.0.0or later versions)

5GHz ( ArubaOS8.9.0.0or later versions)

6GHz ( ArubaOS8.9.0.0or later versions)

ip-addr

ip6-addr

Description

Show AP radios registered to thiscontroller.

Parameter

Description

ap-group

Allows you to filter radio information by AP group.

ap-name

Allows you to filter radio information by AP name.

dot11a ( For versions prior toArubaOS8.9.0.0)

Allows you to filter 802.11a radio information.

dot11g ( For versions prior toArubaOS8.9.0.0)

Allows you to filter 802.11g radio information.

2.4GHz ( ArubaOS8.9.0.0or later versions)

Allows you to filter 2.4 GHz radio information.

5GHz ( ArubaOS8.9.0.0or later versions)

Allows you to filter 5 GHz radio information.

6GHz ( ArubaOS8.9.0.0or later versions)

Allows you to filter 6 GHz radio information.

ip-addr

Allows you to filter radio information by IP address.

ip6-addr

Allows you to filter radio information by IPv6 address.

Example

The output of the command in the following example displays statistics for the AP's radio, as well as statistics for transmitted and received frames.

In the actual CLI, it will appear in a single, long table.

(host) [mynode] #show ap radio-summary

APs Radios information

----------------------

Name Group AP Type IP Address Band Mode

---- ----- ------- ---------- ---- ----

172.17.153-7 172.17.153 104 55.55.57.44 2.4 AP:1

172.17.150-5 172.17.150 104 55.55.57.42 2.4 AP:6

172.17.153-13 172.17.153 104 55.55.57.35 2.4 AP:6

172.17.151-42 172.17.151 104 55.55.57.34 2.4 AP:11

172.17.151-34 172.17.151 104 55.55.57.33 2.4 AP:11

172.17.155-26 172.17.155 104 55.55.57.22 2.4 AP:1

EIRP/MaxEIRP NF/U/I TD TM TC

------------ ------ -- -- --

28/29.5 -96/ 67/ 5 0/0/0/0/0/0 33/33/33/32/32/32 0/0/0/0/0/0

29.5/29.5 -96/ 27/ 3 0/0/0/0/0/0 12/11/12/12/12/11 0/0/0/0/0/0

29.5/29.5 -96/ 31/ 3 0/0/0/0/0/0 13/13/14/14/12/14 0/0/0/0/0/0

25/29.5 -96/ 28/ 6 0/0/0/0/0/0 10/10/10/9/11/10 0/0/0/0/0/0

25/29.5 -96/ 32/ 7 0/0/0/0/0/0 10/11/11/10/11/11 0/0/0/0/0/0

28/29.5 -96/ 70/ 4 0/0/0/0/0/0 27

NF: Noise Floor(dBm); U: Utilization(%); I: Interference(%)

TD: Time used by data frames (%); TM: time used by mgnt frames(%); time used by ctrl frames (%)

Total Radios:6

The output of this command includes the following information:

Parameter

Description

Name

Name of the AP.

Group

Group to which AP radio is assigned.

AP Type

AP model.

IP Address

Radio IP address.

Band

Band on which radio is operating on (2.4 GHz or 5 GHz) ( For versions prior toArubaOS8.9.0.0) /2.4 GHz, 5 GHz, or 6 GHz (ArubaOS8.9.0.0 or later versions) .

Mode

Mode on which radio is operating; AP: AP Mode; AM: Air Monitor Mode, Spectrum: Spectrum Monitor Mode.

Optionally, you can also specify the channel number.

EIRP/Max EIRP

Current EIRP output and maximum EIRP allowed for this radio (dBm).

NF/U/I

Noise Floor (dBm) / Utilization (%) / Interference (%).

TD

Time used by data frames (%).

TM

Time used by mgmt frames(%).

TC

Time used by ctrl frames (%).

Command History

Version

Modification

ArubaOS8.9.0.0

The following changes were made:

Replaceddot11aanddot11gwith5GHzand2.4GHzparameters respectively ( ArubaOS8.9.0.0or later versions)..

Introduced6GHzparameter for Wi-Fi 6E APs ( ArubaOS8.9.0.0or later versions).

Introduced6GHzvalue forBandoutput parameter ( ArubaOS8.9.0.0or later versions).

ArubaOS8.0.0.0

Command introduced.

Command Information

Platforms

Licensing

Command Mode

All platforms

Base operating system.

Enable mode onMobility Conductor.