show ap wifi-uplink status

显示ap wifi-uplink状态{ap-name < ap-name> | bssid | ip-addr }

Description

Shows the status of APs with Wi-Fi uplink. The optional output modifiers | begin , | exclude, and | include help you display those lines that begin, include, exclude, respectively, the line expression given in the CLI command. The | redirect-output modifier helps you redirect the command output.

Parameter

Description

ap-name

Name of the AP with Wi-Fi client.

bssid

Name of the required BSSID of the AP.

ip-addr

IP address of the AP with Wi-Fi client.

Example

The following example displays the status of the AP with Wi-Fi uplink profile. (For versions prior toArubaOS8.10.0.0)

(host) [mynode] #show ap wifi-uplink status ip-addr 10.65.43.247 WiFi uplink status ------------------ SSID gran-uplink BSSID ac:a3:1e:d2:19:d0 Unitcast/Multicast Encryption wpa2-aes-psk wpa2-aes-psk Link Health (%) 20 AID 1 Associated Time 14m:55s Associated AP Beacon Time 10h:42m:53s Channel 149 RSSI 52 Noise Floor 96 Phy 5GHz-VHT-20sgi-3ss Maximum Speed (mbps) 288 Overall/Tx/Rx Goodput (mbps) 17.7 17 23.7 Last Tx Timestamp 2019-02-28 15:43:29 Last Rx Timestamp 2019-02-28 15:43:29 Last Tx Rate (mbps) 6 Last Rx Rate (mbps) 173 Last ACK RSSI 52

The following example displays the status of a Wi-Fi 6E AP with Wi-Fi uplink profile on a 6 GHz band (ArubaOS8.10.0.0 or later versions).

(host) [mynode] #show ap wifi-uplink status ap-name ap655-8391 WiFi uplink status ------------------ SSID test-wifi-wpa3 BSSID 1c:28:af:68:2a:70 Unicast/Multicast Encryption wpa3-sae-aes wpa3-sae-aes Link Health (%) 100 AID 16 Associated Time 14m:47s Associated AP Beacon Time 2d:13h:36m:10s Channel 37 RSSI 68 Noise Floor 92 Phy 6GHz-HE-20-2ss Maximum Speed (mbps) 1152 Overall/Tx/Rx Goodput (mbps) 28.6 30.7 25.3 Last Tx Timestamp 1936-08-25 14:57:28 Last Rx Timestamp 1936-08-25 14:57:28 Last Tx Rate (mbps) 1201 Last Rx Rate (mbps) 1201 Last ACK RSSI 51

Related Commands

Command

Description

ap wifi-uplink-profile

This command configures a Wi-Fi uplink profile.

Command History

Command

Description

ArubaOS8.10.0.0

The command output was modified to display the following changes on Wi-Fi 6E APs:

wpa3-sae-aesvalue forUnicast/Multicast Encryptionparameter.

6GHzvalue forPhyparameter.

ArubaOS8.5.0.0

Command introduced.

Command Information

Platforms

Licensing

Command Mode

All platforms.

Base operating system.

Enable or Config mode onMobility Conductor.