show ip nexthop-list

show ip nexthop-list

details STRING

STRING

Description

This command displays the next hop list settings for policy-based routing. A next hop IP is the IP address of a adjacent router or device with layer-2 connectivity tomanaged device. The next hop list provides redundancy for the next hop devices by forwarding the traffic to a backup next hop device in case of failures. If active next hop device on the list becomes unreachable, traffic matching a policy-based routing ACL is forwarded using the highest-priority active next hop on the list. For more information on this feature, seeip nexthop-list on page 1.

Parameter	Description
details	Displays detailed next hop settings for policy-based routing.
STRING	Displays the next hop settings based on the next hop list name.

Example

The following command displays the configuration settings for the one configured next hop list.

The output of this command displays the following information

Parameter	Description
Name	Name of the next hop list
Type	Type of next hop.
Dest	Destination prefix address.
先发制人的Failover	This column indicates whether preemptive failover is enabled or disabled. If preemption is enabled and a higher priority next hop becomes reachable again, packets are again forwarded to the higher priority next hop.
Nexthop	Next hop IP address.
Nexthop Dest	Next hop destination prefix address.
Nexthop Priority	List of the IP addresses of all next hop IPs, including the priority assigned to each device when the list was configured.

Related Commands

Command	Description
ip route	This command configures a static route onMobility Conductor. (These routes can use a next hop list.)
ip nexthop-list	Configure next hop list settings for policy-based routing.

Command History

Version	Description
ArubaOS8.0.0.0	Command introduced.

Command Information

Platform	License	Command Mode
All platforms	Base operating system.	Enable or Config mode onMobility Conductor.