show ip route
counters
static
stats
Description
This command displays theMobility Conductorrouting table with static routes configured on theMobility Conductorusing theip routecommand. Use theip default-gatewaycommand to set the default gateway to the IP address of the interface on the upstream router or switch to which you connectMobility Conductor.
Parameter |
Description |
counters |
Displays the number of routes present, categorized by type. |
static |
Include this optional parameter to display only static routes. |
stats |
Displays route statistics. |
Examples
下面的例子显示了IP address of routers and the VLANs to which they are connected:
(host) [mynode]#show ip route
M - mgmt, U - route usable, * - candidate default, V - RAPNG VPN/Branch
Gateway of last resort is Imported from DHCP to network 0.0.0.0 at cost 10
Gateway of last resort is Imported from CELL to network 0.0.0.0 at cost 10
Gateway of last resort is Imported from PPPOE to network 0.0.0.0 at cost 10
Gateway of last resort is 10.7.73.77 to network 0.0.0.0 at cost 1
S* 0.0.0.0/0 [1/0] via 10.7.73.77*
S 172.0.0.0/8 [1/0] via 172.16.1.253*
Related Commands
Command |
Description |
Configures the default gateway forMobility Conductoror themanaged device. |
|
Configures global parameters for configured RADIUS servers. |
Command History
Release |
Modification |
ArubaOS8.9.0.0 |
The command output was modified to display the configured default gateway on the OOB management port for7280controllers. |
ArubaOS8.2.1.0 |
The order of displaying the administrative distance and cost was changed tofromin the command output. |
ArubaOS8.0.0.0 |
Command introduced. |
Command Information
Platforms |
License |
Command Mode |
All platforms |
Base operating system. |
Enable or Config mode onMobility Conductor. |
