show netdestination

show netdestination {ipv4 | ipv6 | } [verbose]

Description

Displays IPv4 and IPv6 network destination information.

The optional output modifiers | begin , | exclude, and | include help you display those lines that begin, include, exclude, respectively, the line expression given in the CLI command. The | redirect-output modifier helps you redirect the command output.

Parameter	Description
ipv4	Displays IPv4 network destinations.
ipv6	Displays IPv6 network destinations.
	Displays the name or IP addresses.
verbose	Prints the netdestination table entries.

Example

这个命令显示所有netdesti问题nation configured on thismanaged device. The output below displays information for all configured IPv4 and IPv6 netdestinations. To display additional detailed information for an individual netdestinations, include the name of the netdestination at the end of the command.

The output includes the following parameters:

Parameter	Description
Name	Network destination name.
Destination ID	Network destination ID.
Position	Network destination position.
Type	Network destination type.
IP addr	IP address of the network destination.
Mask-Len/Range	Network destination subnet mask and range. If the netdestination object has a defined domain or host name, that value will appear in the mask-Len or Range column.

Related commands

Command	Description
netdestination	This command configures an alias for an IPv4 network host, subnetwork, or range of addresses.
netdestination6	This command configures an alias for an IPv6 network host, subnetwork, or range of addresses.

Command History

Version	Modification
ArubaOS8.2.1.0	TheDestination IDparameter was added to the output.
ArubaOS8.2.0.0	Theipv4andipv6parameters were added.
ArubaOS8.0.0.0	Command introduced.

Command Information

Platforms	License	Command Mode
All platforms	You must have a PEFNG license to configure or view a netdestination.	Enable or Config mode onMobility Conductor.